Precision-digital PD6200 User Manual download pdf (Page 8)

Model PD6200 Analog Input Rate/Totalizer Instruction Manual

SPECIFICATIONS

Except where noted all specifications apply to operation at +25°C.

General

DISPLAY

Main display: 0.6" (15 mm) high, red LEDs

Second display: 0.46" (12 mm) high, red LEDs

6 digits: each (-99999 to 999999), with lead zero blanking.

DISPLAY

INTENSITY

Eight user selectable intensity levels

DISPLAY

UPDATE RATE

5/second (200 ms)

OVERRANGE

Display flashes

999999

UNDERRANGE

Display flashes

-99999

DISPLAY

ASSIGNMENT

The main (Big) and small (Little) displays may be assigned

to rate, total, grand total, alternate rate & total, max/min,

units (small display only), set points, and Modbus input.

PROGRAMMING

METHODS

Four front panel buttons, digital inputs, PC and MeterView

Pro software, or cloning using Copy function.

NOISE FILTER

Programmable from 2 to 199 (0 will disable filter)

FILTER BYPASS

Programmable from 0.1 to 99.9% of calibrated span

RECALIBRATION

All ranges are calibrated at the factory. Recalibration is

recommended at least every 12 months.

MAX/MIN

DISPLAY

Max/min readings reached by the process are stored until

reset by the user or until power to the meter is turned off.

PASSWORD

Three programmable passwords restrict modification of

programmed settings and two prevent resetting the totals.

Pass 1: Allows use of function keys and digital inputs

Pass 2: Allows use of function keys, digital inputs and editing set/reset points

Pass 3: Restricts all programming, function keys, and digital inputs.

Total: Prevents resetting the total manually

Gtotal: Prevents resetting the grand total manually

NON-VOLATILE

MEMORY

All programmed settings are stored in non-volatile memory

for a minimum of ten years if power is lost.

POWER

OPTIONS

85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max

or jumper selectable 12/24 VDC  10%, 15 W max

FUSE

Required external fuse: UL Recognized, 5 A max, slow

blow; up to 6 meters may share one 5 A fuse

ISOLATED

TRANSMITTER

POWER SUPPLY

Terminals P+ & P-: 24 VDC  5% @ 200 mA max (standard),

(12/24 VDC powered models rated @ 100 mA max).

5 or 10 VDC @ 50 mA max, selectable with internal jumper J4.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 107 108

Comments to this Manuals

No comments

Precision-digital PD6200 User Manual Page 8

Comments to this Manuals

Related products and manuals for Control panel Precision-digital PD6200