Precision-digital PD6870 User Manual download pdf (Page 9)

PD6870 Loop-Powered Process Meter Instruction Manual

INSTALLATION

For Installation in USA: The PD6870 must be installed in accordance with the

National Electrical Code (NEC) NFPA 70.

For Installation in Canada: Install in accordance with applicable local and national

regulations (e.g. NEC). The PD6870 must be installed in accordance with the

Canadian Electrical Code CSA 22.1. All input circuits must be derived from a CSA

approved Class 2 source.

For European Community: The PD6870 must be installed in accordance with the

ATEX directive 94/9/EC and the product certificate Sira 10ATEX116X.

All controls and wiring connectors are accessed by opening the enclosure. To access

electrical connectors, remove the 2 captive screws and remove the display module

from the enclosure.

WARNING

Disconnect from supply before opening enclosure. Keep cover

tight while circuits are alive. Conduit seals must be installed within

18" (450mm) of the enclosure.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Precision-digital PD6870 User Manual Page 9